Anthro eNook Standard Spécifications télécharger pdf (Page 6)

Questions? Call us at 800.325.3841 or visit anthro.com. We’re happy to walk you through the assembly!

STEP 11

Install Four Fasteners onto Main Unit

¡ Using your Hex Driver, install two black

Workstation Screws onto the side walls, but

don’t tighten all the way. Stop tightening

when the screw head is about 1/4" from tight.

Workstation Screw

325-5092-00

STEP 12

Attach Main Unit to Frame

¡ Open the top and bottom doors and

ﬁnd the angle slots on the Frame.

¡ Lift the Main Unit onto the Frame by

aligning the two Workstation Screws

on the Frame with the angle slots.

Make sure that both fasteners are

captured.

¡ Using a 5/32" hex driver, tighten

down the workstation screws.

STEP 10

Insert Screw and Install Frame

¡ Insert one 1-5/8" long screw into the top two TOGGLERs, but don’t tighten all the way. Leave the screw head about

1/4" from the plastic cap.

¡ Lift the Frame onto the top two screws. Install the bottom two screws, then tighten down all four screws.

1 2 3 4 5 6 7 8 9

Pas de commentaire

Anthro eNook Standard Spécifications Page 6